Quality Franklin Springs GA septic system installers do a lot of examination, long before a unit gets placed into the ground. A brand new unit will last many years, and possibly even generations, if it’s installed correctly, but it can malfunction instantaneously if it’s not. Additionally, all Franklin Springs GA septic system installers must secure a permit for them to execute the install, and may have to work with city or county officials to show that particular tests were done in order to continue. These three evaluations are necessary primary steps that should always be taken before any work or designs are done, and it may also be beneficial to accomplish them before you purchase a property, so you could be assured that a tank and leach field will be permitted.
1. Pit
The pit test is relatively uncomplicated. In the course of this test, a hole is excavated and the soil is analyzed to determine its composition. A conventional leach field is dependent on the soil’s composition to drain efficiently. If there is a considerable amount of gravel or sand, your leach field should be capable to discharge the effluent (water) from the tank well, where the soil will finish cleaning it. If the soil has a considerable amount of clay or rock, it won’t sink well, consequently a standard leach field will not be an alternative. If the location you’ve selected does not pass the pit test, you may be able to choose another site on your house or use an alternate type of drain field, like a mound system.
2. Perc
The perc, or percolation test, consists of excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then filling it with water. The hole is generally left saturated for about two hours, and refilled as needed. Then, the hole is filled with 6 inches of water and observed for drainage.
3. Visual
There are numerous things an inspector will investigate visually. Many units are gravity-fed, so they don’t rely upon electricity or pumps to transfer effluent from the tank to the leach field. As a result of this, the incline of the ground is essential. An inspector will also seek out inclines that could feed excessive water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Work with Quality Franklin Springs GA Septic System Installers Now
Picking the right configuration, style of system, and evaluating the land correctly, are all fundamental steps in making sure an install goes off without a hitch. Most importantly, these steps ensure that the install is done properly, so that a system provides decades of use without issue. If you’re prepping for an install, call Septic Tank Pros Athens GA. Our partner technicians are experienced and committed to quality, so you could be sure the job is done right. Call (706) 608-8250 today.