Quality Nicholson GA septic system installers do a great deal of legwork, long before a unit gets placed into the ground. A new unit will last years, and possibly even generations, if it’s installed properly, but it can fail right away if it’s not. Furthermore, all Nicholson GA septic system installers must acquire a permit in order to do the install, and may need to work with city or county officials to show that specific tests were performed in order to proceed. These three assessments are essential first steps that should always be taken before any job or designs are done, and it may also be helpful to do them before you buy a property, so you could be assured that a tank and leach field will be allowed.
1. Pit
The pit test is pretty straightforward. During this test, a hole is excavated and the soil is inspected to figure out its composition. A standard leach field is dependent on the soil’s composition to drain efficiently. If there is a lot of gravel or sand, your leach field should be able to discharge the effluent (water) from the tank well, where the soil will finish sanitizing it. If the soil has a considerable amount of clay or rock, it won’t drain well, therefore a traditional leach field will not be an option. If the location you’ve chosen does not successfully pass the pit test, you may be able to select another site on your home or use an alternate kind of drain field, like a mound system.
2. Perc
The perc, or percolation test, consists of excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then saturating it with water. The hole is generally left drenched for about two hours, and topped off as needed. After this, the hole is filled with 6 inches of water and observed for drainage.
3. Visual
There are numerous things an inspector will look into visually. Many units are gravity-fed, so they don’t depend on electricity or pumps to move effluent from the tank to the leach field. As a result of this, the slope of the ground is essential. An inspector will also try to find slopes that could feed excessive water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Work with Quality Nicholson GA Septic System Installers Today
Choosing the right layout, style of system, and assessing the land correctly, are all essential steps in making sure an install goes off without a hitch. Most importantly, these steps guarantee that the install is done properly, so that a system provides decades of use without problems. If you’re prepping for an install, call Septic Tank Pros Athens GA. Our partner technicians are skilled and devoted to quality, so you could be sure the job is done right. Call (706) 608-8250 now.